November and the months until March are the perfect time to plant fruit trees. Now that the leaves are off the trees, and the ground is not too cold, roots can establish themselves without any burden of feeding the tree. And in northern latitudes fruit trees are all deciduous, they lose their leaves in the winter.
Why plant fruit trees? Apart from the fact that many are very beautiful they are also extremely useful and help us to make our personal contribution to reducing climate change. Fruit, or for that matter vegetables, grown on our own piece of land reduce CO2 emissions. Avoiding delivery from far flung orchards or distant countries means no use of oil and no greenhouse gases.
In my own small garden the fruit tree of most importance is my Bramley apple. This is large enough to sit under in the summer, provide wonderful blossom in spring and a large and reliable crop of cooking apples each autumn. All winter I can watch birds moving onto it and through it to find a seemingly inexhaustible supply of food. What more could anyone ask from a single tree?
The range of fruit trees suitable for a garden is enormous. Most types of fruit, be they apples, pears, cherries, plums, damsons or gages have been grafted onto rootstocks to control their heights. This is a process where the top of the tree, above the graft, is the variety you want for its fruit but the bottom, below the graft, has been chosen for its vigour. The same variety, a Bramley apple for instance, may be available on very dwarf, dwarf, semi dwarf, semi vigorous or vigorous rootstock allowing you to choose the one which suits your garden best. In addition there are trees trained in the nursery to give different shapes such as cordons, espaliers, fans, stepovers and ballerinas. Cordons, fans and espaliers are trained flat to give small trees useful as a hedge or trained on a wall. Stepovers are so low that you can literally edge a garden bed with them and ballerinas give tall thin trees. Whichever form you choose is likely to be available in a huge range of apples. The other fruit, pears etc., are also likely to be available in a considerable number of varieties. So how would you choose the type of fruit to suit you?
This of course is a very personal matter. To consider only apples, there are lots of factors, starting with taste. This is entirely a personal matter but such issues as time of fruiting, ease of growing (some varieties are far more fussy and may need lots of spraying to produce decent crops - anathema to the organic gardener), whether dessert or cooking or both, ease of storage and pollination group should be considered. Get these wrong and you may have plenty of years to regret your mistake.
The best place to start is with a gardening book and one or more catalogues. There are many reliable nurseries with free catalogues of fruit trees which have been developed from ancient times to the present. But before you start looking at them you would be well advised to think about which varieties taste best. Then the finished size of the tree and lastly the pollination group. Some trees are self pollinating but most will need another tree flowering at the same time if they are to produce fruit. Some indeed, such as my Bramley, need two other pollinators flowering at the same time and these would usually have to be within around 100metres of my tree for the bees to travel between them. In towns or near orchards this is rarely a problem but with more remote gardens you may have to plant more than one tree to get decent amounts of fruit. Again a good book and a decent catalogue will help you out here.
After you have planted your tree don't expect a crop for the first year. If it produces a small one you should probably remove it as soon as you see the fruit set and leave the tree to gather its strength during that first crucial year. Water it well in dry spells during the first couple of summers and get ready to wrestle with the joys of pruning. It is quite possible to get crops without pruning but better crops produced more frequently, ie yearly instead of every two years, are more likely if you learn the beginnings of the art.I would always recommend referring to the Royal Horticultural Society, www.rhs.org.uk, for books and information on the subject.
Fruit tree catalogues in the UK can be obtained from www.frankmatthews.com or www.kenmuir.co.uk. Googling will produce very many more fruit nursery addresses.
Wednesday, 19 November 2008
Monday, 10 November 2008
CHOOSING A SHADE TREE FOR A SMALL GARDEN
There are many trees suitable for providing shade. In my own garden a Bramley apple does the job very well but a Betula (Birch) would also do. A gently weeping Prunus (flowering Cherry) such as Shirotae - also known as Mount Fuji - would also be good but the roots are shallow and might be a problem if you are planting into a lawn. Sometimes the roots break the surface of the grass and make mowing more difficult. The amount of shade given by birch may be slightly less than for apple or cherry as the canopies of birch are lighter. This can be an advantage if you wish to plant into a lawn as it allows some growth of more shade-tolerant grasses.
All these trees are quite small and suitable for small gardens. The Bramley apple would need to be grown on a more vigorous rootstock so that you get the height and can walk underneath. You would need to make it clear when you buy one of these trees that you want one with enough clear stem to allow walking, or at least sitting, beneath it.
All these trees are quite small and suitable for small gardens. The Bramley apple would need to be grown on a more vigorous rootstock so that you get the height and can walk underneath. You would need to make it clear when you buy one of these trees that you want one with enough clear stem to allow walking, or at least sitting, beneath it.
Thursday, 6 November 2008
SHOULD I REMOVE THE IVY FROM A TREE IN MY GARDEN?
There has always been a lot of controversy about the effect of Ivy on trees and whether it is a good idea to remove it or not. In the end your decision may depend on what you want from your tree - a classic uncluttered shape or a wildlife habitat and a more natural, woodland appearance.
Ivy is a native, evergreen climber able to thrive in very low light levels such as often exist on the woodland floor or underneath the canopy of a tree. It uses a tree as a means of support, a way of climbing from the darkness at the ground to the relatively higher light levels at the top of trees. When it arrives there it changes form and starts to produce differently shaped leaves as well as flowers and seeds. In the process it does not generally harm a healthy tree but may contribute towards removing light from the leaves of an old or dying tree. In addition some trees with lighter canopies, such as Ash, which let more light through may support larger Ivy plants but these are not expected to shorten the life of the tree. They may however make it more top heavy and likely to fall in a storm or they may disguise damage to the trunk or branches of a tree making it more dangerous. In woodland situations this may not matter but in private gardens, in parks or on roadsides consideration may need to be given to this. In addition you may feel that a tree covered in ivy does not look as good as one without.
Before taking the decision to remove Ivy from your tree however please consider that it creates an excellent wildlife habitat. As well as providing cover and food for a huge range of invertebrates (insects, spiders etc) it can give excellent roosting places to birds and bats, overwintering niches for butterflies and moths and, of course, nesting places for a range of birds.
if you decide to remove your Ivy it is generally done by cutting the plants low down. They rely entirely on their roots in the ground for nutrition, they do not take any from the tree, and so cutting the stems will kill the plant above. It will go dry and brown with time and can more easily be removed from the support of the tree.
To sum up, the decision on whether to remove the ivy will depend on what you want from your tree. If you want it for its form rather than its value as a habitat you may decide to remove the Ivy. In a woodland setting the choice is usually easier as the form of a tree grown in the relative open space of a park or garden is rarely achieved and you can appreciate the tree for its role in the woodland ecosystem.
Ivy is a native, evergreen climber able to thrive in very low light levels such as often exist on the woodland floor or underneath the canopy of a tree. It uses a tree as a means of support, a way of climbing from the darkness at the ground to the relatively higher light levels at the top of trees. When it arrives there it changes form and starts to produce differently shaped leaves as well as flowers and seeds. In the process it does not generally harm a healthy tree but may contribute towards removing light from the leaves of an old or dying tree. In addition some trees with lighter canopies, such as Ash, which let more light through may support larger Ivy plants but these are not expected to shorten the life of the tree. They may however make it more top heavy and likely to fall in a storm or they may disguise damage to the trunk or branches of a tree making it more dangerous. In woodland situations this may not matter but in private gardens, in parks or on roadsides consideration may need to be given to this. In addition you may feel that a tree covered in ivy does not look as good as one without.
Before taking the decision to remove Ivy from your tree however please consider that it creates an excellent wildlife habitat. As well as providing cover and food for a huge range of invertebrates (insects, spiders etc) it can give excellent roosting places to birds and bats, overwintering niches for butterflies and moths and, of course, nesting places for a range of birds.
if you decide to remove your Ivy it is generally done by cutting the plants low down. They rely entirely on their roots in the ground for nutrition, they do not take any from the tree, and so cutting the stems will kill the plant above. It will go dry and brown with time and can more easily be removed from the support of the tree.
To sum up, the decision on whether to remove the ivy will depend on what you want from your tree. If you want it for its form rather than its value as a habitat you may decide to remove the Ivy. In a woodland setting the choice is usually easier as the form of a tree grown in the relative open space of a park or garden is rarely achieved and you can appreciate the tree for its role in the woodland ecosystem.
Thursday, 23 October 2008
CHOOSING NATIVE HEDGE PLANTS
The correct mix will depend on your soil and site conditions and varies around the country and from site to site. The tableabove may be of help to you.
Hedging mixes are often around 50% hawthorn with the other half made from a mix of plants suitable to the conditions. You can see from the table however that hawthorn is not suited to wet or shady conditions. For these sites it may be better to use a large percentage of blackthorn. It is often a good idea to look at the hedging which thrives in your neighbourhood to see which plants are likely to do best.
STAKING A TREE
For very large trees, say those over 30cm girth (girth is the circumference one metre above the ground for a single-stemmed tree), special staking methods may be needed which can only be undertaken by professionals. For smaller trees however it is usually practical to undertake staking oneself. The basic intention is to stop the root system of the plant from moving in the wind whilst allowing the trunk to flex. It is also important to prevent the roots from being broken by the stakes during planting.
One modern way to approach staking is to think of the stem and branches of a tree in a similar way to the muscles of an animal's body - they are both strengthened by use. Thus allowing a tree to move in the wind without allowing the roots to move is likely to create a stronger tree in the long term. For trees with clear stems in situations of normal wind exposure a tree should be staked with a single stake driven in at 45degrees to the vertical and crossing the tree trunk about 450mm or 18inches above the ground. The stake should be driven in outside the rootball. A rubber tree tie should be tied round the tree and attached to the stake and a rubber cushion placed between the tree and the tree tie. These ties will need to be inspected each year and loosened as the tree grows.
In very windy siuations or for larger trees, say greater than 20cm girth, two short stakes with a wooden cross piece are best used. The cross piece has a rubber cushion attached between it and the tree and rubber tries are used to bind the tree to the cushion.
Very large trees may need ground anchors, or bracing using wires attached to the branches of the tree, but these are more jobs for professionals.
One modern way to approach staking is to think of the stem and branches of a tree in a similar way to the muscles of an animal's body - they are both strengthened by use. Thus allowing a tree to move in the wind without allowing the roots to move is likely to create a stronger tree in the long term. For trees with clear stems in situations of normal wind exposure a tree should be staked with a single stake driven in at 45degrees to the vertical and crossing the tree trunk about 450mm or 18inches above the ground. The stake should be driven in outside the rootball. A rubber tree tie should be tied round the tree and attached to the stake and a rubber cushion placed between the tree and the tree tie. These ties will need to be inspected each year and loosened as the tree grows.
In very windy siuations or for larger trees, say greater than 20cm girth, two short stakes with a wooden cross piece are best used. The cross piece has a rubber cushion attached between it and the tree and rubber tries are used to bind the tree to the cushion.
Very large trees may need ground anchors, or bracing using wires attached to the branches of the tree, but these are more jobs for professionals.
WHAT DO THE SIZES OF TREES LISTED IN CATALOGUES MEAN?
Trees in the UK are usually listed by trunk size and by size of container. For instance a tree listed as a 12-14 is a tree with a single stem. The girth (circumference of the stem measured 1metre above the ground level) is in the the range 12-14cms. This girth is about three times the diameter at this point. By happy coincidence, for quite a lot of these standard trees (a standard tree has a clear stem up to at least 1.8metres or 6ft with a formed head above) the height of the tree in feet is close to the girth in centimetres. So a 12-14cm girth tree is likely to have a height of around 12-14 feet. Of course this is not an absolute rule.
Sometimes trees are sold with several stems (called multi-stemmed) and these usually have an overall height listed in a catalogue instead of a girth.
Pot sizes are often given but it may be hard to imagine them. Start with the information that a standard bucket is around 10 litres. Trees in pots up to sizes of about 50 litres can often be moved by one strong person and up to around 75litres by two people. Large trees in pots bigger than this will usually need machinery to move, lift and plant them and may weigh a lot. For instance a specimen tree in a pot of 350litres may weigh in the range of 350kg.
To give some idea of pot sizes, a 70litre pot will usually be around 45cms high and 50cms diameter and a 250litre pot may be 65cms high and 70cms diameter.
Sometimes trees are sold with several stems (called multi-stemmed) and these usually have an overall height listed in a catalogue instead of a girth.
Pot sizes are often given but it may be hard to imagine them. Start with the information that a standard bucket is around 10 litres. Trees in pots up to sizes of about 50 litres can often be moved by one strong person and up to around 75litres by two people. Large trees in pots bigger than this will usually need machinery to move, lift and plant them and may weigh a lot. For instance a specimen tree in a pot of 350litres may weigh in the range of 350kg.
To give some idea of pot sizes, a 70litre pot will usually be around 45cms high and 50cms diameter and a 250litre pot may be 65cms high and 70cms diameter.
Subscribe to:
Posts (Atom)